目前GTV20为符合人体工程学的工作场所设计

GTV 2.0 –为符合人体工程学的工作场所设计

With the introduction of the suspension system GTV 2.0, ROSE Systemtechnik replaces (3)启动油泵排气:将回油阀打开,送油阀打开.旋转电源开关,接通机器电源,显示建议画面,2秒钟后显示测试画面.按下"启动"键,启动机电,油泵开始工作,延续工作约1分钟后关闭回油阀,此时可发现下压板缓慢上升,在下压板上升1段距离后,关闭送油阀并打开回油阀,此时下压板处于回落状态.重复以上步骤3~4次可完全排除系统内气体.如仍没法排除,可按以下方法排气:停机后打开前门,用随机带的扳手,拧下油泵前端面上的大螺母,再开机放油,至流出的油安稳后,关机,旋上螺母.its forerunner GTV, which is already established on the market. Thus, the enclosure manufacturer offers an improved HMI solution for various branches of industry and sets an exclamation mark for ergonomic workplace design.

Thanks to the height adjustability of the GTV 2.0, the control system can be easily adapted to the operator s needs. It can be moved continuously in the vertical position over the entire stroke and then remains in the desired position. This allows the control system to be swivelled out of the working area to give the operator the best possible freedom of movement and maintain a healthy posture. In addition, an 追加了HRB600牌号unrestricted view of the working area and a permanent clearance of the escape route are also made possible.

Improved torsional stiffness, potential equalisation and hovering behaviour

Furthermore, the GTV 2.0 i我国产能已从当年的不足变成目前的多余s a freely positionable version, in which the outlet of the control system can be either upright or standing. Compared to its forerunner, the GTV 2.0 is characterised by a significant increase in torsional stiffness as well as continuous equipotential bonding and has very good hovering behaviour.

With the GTV 2.0, we are continuing on our alrea湿度：80%dy successful GTV and taking another important step in creatin留给中国实体行业的时间已不多了g ergonomic workplace designs, says Tobias B sching, Productmanager for HMI.

The GTV 2.0 offers a load range of kg and is therefore particularly suitable for medium-heavy to heavy control systems. In addition, the lift system can be combined on the machine side with the GTL suspension system and on the operator side with the support arm system GTN II. Furthermore, it is also possible to connect smaller systems such as the GTS or GTK elektronic with an adapter, or even encapsulated Panel PCs from various manufacturers using a 48 mm round tube.

The GTV 2.0 suspension system is suitable for a load range of kg

The installation of the GTV 2.0 is characterised above all by the generous cable duct. It has an easy and quick opening and is separated from mechanical components to ensure safe and effective cable routing. Further advantages are the adjustable ground stops, which prevent the control system from colliding with possible interference nodes, and a friction element, which allows for increased stiffness of the height adjustment if required. The adjusting screw also offers a great advantage, as it allows the GTV 2.0 to be precisely adjusted to t有效载荷能力约为55万磅he weight of the attached control system.